Our Set Service Packages
Full bike check & report
Chain checked for wear & lubricated
Correct Setup of Gears & Brakes
All fixings tightened to specified torque
Full bike check & report
Drivetrain removed & thoroughly cleaned
Bottom Bracket checked & re-lubricated
Headset cleaned, checked & re-lubricated
Minor wheel truing & bearing adjustments made
Correct Setup of Gears & Brakes
All fixings tightened to specified torque
Full bike check & report
Full pro bike wash (Only Muc-Off ® products used)
Drivetrain removed & thoroughly cleaned
All Brake Calipers removed & cleaned (road caliper brakes re-built)
All other parts removed & inspected
Wheels fully trued and tightened
Hub bearings re-lubricated and adjusted
Correct Setup of Gears & Brakes
All fixings tightened to specified torque
Customers will always be contacted before parts are fitted.
Parts are not included in the Service prices
A full bike fitting to your bike and in the comfort of your own home. Using the BIKEFIT® system we cover cleat position fore/aft, medial/lateral and angle. We also look at saddle height, fore/aft and then check the angles through your upper body to check that handlebar position is correct for you. This process takes about 1 hour.
Prices may vary and it is advisable to contact us with the fork serial number to get an accurate price and time scale. Prices vary due to manufacturers seal kit prices. If your fork isn't listed please contact us as we can't list every fork and brand.
Clean and Inspect.
Strip down and clean interior of the air can.
Replace seals and lubricating fluid within the air can.
Return air pressure to riders pre-service values.
Clean and inspect the fork.
Strip down and drain oil.
Clean internals of the fork lower.
Replace wiper seals, foam rings, oil and crush washers.
Reset settings to riders pre-service positions and pressures.
Please contact us with serial number/ID code to book in.
Clean and inspect the fork.
Strip down and drain oil.
Clean internals of the fork lower.
Replace wiper seals, foam rings, oil and crush washers.
Reset settings to riders pre-service positions and pressures.
Please contact us with serial number/ID code to book in.
Clean and inspect the fork.
Strip down and drain oil.
Clean internals of the fork lower.
Replace wiper seals, foam rings, oil and crush washers.
Reset settings to riders pre-service positions and pressures.
Please contact us with serial number/ID code to book in.
Clean and inspect the fork.
Strip down and drain oil.
Clean internals of the fork lower.
Replace wiper seals, foam rings, oil and crush washers. Please note on some newer Rockshox models the wiper seals/foam rings are not changed until the 200hr Service
Reset settings to riders pre-service positions and pressures.
Please contact us with serial number/ID code to book in
Clean and inspect the fork.
Strip down and drain oil.
Clean internals of the fork lower.
Replace wiper seals, foam rings, oil and crush washers.
Reset settings to riders pre-service positions and pressures.
Please contact us with serial number/ID code to book in
Clean and inspect the fork.
Strip down and drain oil.
Clean internals of the fork lower.
Replace wiper seals, foam rings, oil and crush washers.
Reset settings to riders pre-service positions and pressures.
Please contact us with serial number/ID code to book in
Full strip down and clean of your suspension, before replacing all seals and o-rings as instructed and supplied in the appropriate kit for your fork, and re-assembling with new oil. If we need to use any other parts not included in the service cost, we’ll always ask you first - if your looking to upgrade your damper or spring (airshaft or oil) contact us and we can discuss before the service. Please contact us with serial number/ID code to book in.
Set Sag
Adjust Rebound and then fine tune any high or lower speed compression settings
Full strip down, clean and inspection.
new Reverb fluid,bled and replacement of all seals and parts within each models service kit
Individual job charges - collecion & delivery charged at £5 per 10 miles for single jobs (free for multiple jobs)
To get your bike sparkling, we only use bike specific products of the highest quality
Removal of drivetrain from the bike, de-greased & re-installed
Per hydraulic brake (brake fluid not included)
Parts not included
Parts not included
Parts not included
Per Wheel
Parts not included
Collection & Delivery Free within 10 mile radius of ME16. Every 10 miles over this charged at £5
We will carry out a full pre delivery inspection on your online bike purchase. Setting it up correctly and giving you peace of mind
Full preparation of tube faces and threads ready for bike assembly
Our Service packages include Collection & Delivery Free of charge within a 10 mile radius from ME16 Every ten mile radius over this is charged at £5
1/8
Copyright © 2024 Rich Sherman Performance Servicing - All Rights Reserved.
Powered by GoDaddy